Hi friends and fellow restorers!
I am happy to present our new foreskin restoration devices. Let us have a constructive and positive discussion environment. We are doing meaningful work and want to cultivate meaningful relationships within this community. Visit the shop at: http://www.foreskinned.com!
Standard - Medical Grade ISO 10993 by USP.
Our products are medically classified, which means that the materials are approved for prolonged contact with human skin. It is the United States Pharmacopeia agency that ensures and approves materials used in the healthcare industry.
USP - Class I
We have selected an American/English supplier and the factory is located within the UK. The company is listed on the U.S. Stock Exchange (S&P 600).
Basic problems found on today's products as well as our solutions...
Gripper – Slips off.
Silicone has a low friction ratio compared to our comparable material. We are testing a different type of gripper and the advantage of the other material is that it has a significantly higher friction ratio. This means that the product does not slip off your skin. But we are then faced with a new problem. The second material is not able to cope with skin creams and oils well, without the material losing its integrity over time. Silicone has high material integrity which means that it ages well.
We have a different design on our silicone gripper, and they are specifically designed to grip as well as possible around the frame and skin.
Dual Tension Restorer (Our version of DTR)
One of the most obvious features is a cushion/pillow to protect the
glans. The lock is pushed upward and lock the bell on the rod. We have
also created two wings for the rubber band. The lower of the holes can
be used in the beginning for beginners who might
not want to much tension at the start. The griper is created for this
maximum compatibility with the bell. Works for both inner and outer
foreskin.
[Blockierte Grafik: https://i.ibb.co/ggnV8gw/P1.png]
Air
This thing of beauty was the hardest one
to design. We had trials and errors and had to solve a lot of problems.
But in the end, it was worth the work. The device is sealed and you can
push the pressure high without a blowout
of the skin nor leaking air. The gripper is quite soft and won't hurt. I
use this device for 2-4 hours each day. The current Air products, on
the market, appear to have one of the following defects: Air leaks out,
grippers do not hold, grippers hold on too
tightly or the product is not available on the market. We have
succeeded in developing an Air that is airtight and that does not grip
too tightly around the frame. Works mainly with the inner foreskin.
[Blockierte Grafik: https://i.ibb.co/pR5SxCG/P4-2.png]
Strap-device
This device is straight forward. We
wanted an easy device to wear while at work or walking and constant
tension. The beauty is with the way you can strap it. It doesn't go to
the shoe/socket but rather to a band. The band does
not sit around the waist or the shoulder. You will actually laugh at
the simplicity. Our band sits right below the knee and you strap the
device with a rubber. You will have almost the same tension while
standing or sitting. The most creative solution is almost
always easy to do and hard to think about. We worked with different
solutions with 1-2 bands and so on. But one of the guys just
dumb-it-down. Works mainly with the outer foreskin.
[Blockierte Grafik: https://i.ibb.co/nnG05Q2/P2.png]
Retainer
Most retainers on the market are either O-rings or completely round. The problem with O-ring is that you cannot sleep with it due to safety. The problem with retainers, on the market, is that they are not shaped like the anatomy of a penis. We have followed the exact measurement, as accurate as possible, of the glans. All men have a longer head (on the upper side) than on the underside.
Simply put, we have developed a retainer that is fantastic. It will fit perfectly on, even if you get a hard-on… Given that you have enough loose skin for it to allow. That is just mind-blowing! I am a CI2.5 and I can sleep with my retainer. The first few nights are difficult due to the new feeling. I kept taking it off while sleeping. It fell off a few times, the design of the product is like that. If you move much and sleeps unrestful the device will slip of. When you use it on the day, then it will be in the right place all day long.
The absolute best comes now: Our retainer "teaches" your foreskin how it
should be on the glans. The result is that my skin unfolds over the
glans by itself to an
increasing degree. Our retainer has a 7.5%-degree forward tilt
downwards. The purpose is for the skin to lie downwards so that it
mimics an uncircumcised man's penis, and nobody can tell the difference
between a natural foreskin and a foreskinned (restored)
man.
[Blockierte Grafik: https://i.ibb.co/gwFSGmp/P3-v3.png]
Weight (Product 5 - our weight-oriented product)
There are several different solutions to weights. We have found an elegant solution where you can easily adjust how much weight you want on the product. The product consists of stainless steel, so now worrying about magnetic tension.
[Blockierte Grafik: https://i.ibb.co/qks6bKK/P5-v2.png]
Partner
We do not see you as a consumer. We see you as partners on the journey towards restoring your foreskin. I am in the same boat as you are in and I have, literally, my skin in the game alongside you. We are grateful to have the opportunity to create these devices and believe that you will be amazingly satisfied with these products.
Opening
The members on our mail-list (http://www.foreskinned.com/, sign up!) will get access to the shop first around 10 am to 2 pm. We send out the password by mail. Look at your spam-filter if you haven't gotten it by 2 pm on the 30 of August. About 4 hours later we will release the password hear. The official opening of the store will be on the 1 of September. We will start with an opening offer for a week.
Thought, suggestions, and improvements
We are open to any feedback from you. We will be committed to this community onward and will develop the products as we get more feedback from restorers.
Further information
Pricing, the opening offer, and so on will be clear, once you access the
store. Let the discussion be around initial thought about the your
impression and our questions below.
Das ist die E-Mail, die ich von Ben bekommen habe und mit euch teilen sollte. Ich hoffe, dass es einigen von euch hier weiterhilft.
Ich persönlich bin auf jeden Fall gespannt, wie es sich mit den Produkten weiterentwickelt. 
Viele Grüße,
NFPfree